Use these paper filters to enjoy:

• Higher clarity from your espresso shots
• Reduction in “spray” from bottomless portafilters – less mess
• Liberating all of the filter’s pores for coffee to flow through more evenly

These paper filters are sized to fit on the bottom of your portafilter basket, added before adding your grounds!

Note: Classic & NEO Flex sized filters will fit the Flair Signature.

The post Paper Portafilter Filters appeared first on Flair Espresso.

There are two different versions of the shot mirror, depending on the Flair product you own. Check your compatibility below:

• Shot Mirror without Magnetic Coin – Must own a Flair 58 or 58x that features the magnetic disc installed into the base of the Flair post. Mostly Flair 58 bought after mid-May 2023, and Flair 58x bought after late June, 2023.
• Shot Mirror with Adhesive Magnetic Coin – Flair 58, Flair 58 LE and Flair 58 x bought before May 2023. Use with any Flair PRO, Signature, Classic or NEO. For the Flair 58 family, attach your magnetic coin to the post on any side you prefer. For PRO, Signature, Classic and NEO attach to base of your Flair as seen in the phots in this listing.

The post Flair Articulating Shot Mirror appeared first on Flair Espresso.

The more evenly you distribute the grounds, the more evenly water will flow through the bed of coffee. As a result, your extractions will be more balanced, repeatable and most importantly, delicious.

When it comes to distribution tools, there is no better bang for your buck, and most would say, more effective, than the Weiss Distribution Technique, or WDT. Not all tools are created equal, however, and if you have tried this technique before and had disappointing results, it was probably the tool at fault. Needle thickness, stiffness, number, and array matter. Too much—even too few—of any and all of those, and you will struggle to have good results with the technique.

The Flair WDT Tool was designed with all of this in mind, as well as to be the perfect fit for all of our portafilters, from the NEO on up to the 58.

Specifications

• (7) 0.25 mm diameter needles, extending 38 mm
• 9 degrees angle of peripheral needles to center needle
• 24 mm needle span
• 54.7 mm long hilt, 24 mm at widest and 17.4 mm at the waist
• Custom pedestal for storage and protection when traveling
• Tool + Pedestal 103.5 mm tall

For getting started with WDT, we suggest the following these video instructions, linked here >

Caution: Needles are delicate, and non-replaceable. Take care when placing tool back on pedestal to align needles with channels on pedestal

The post Flair WDT Tool appeared first on Flair Espresso.

Volumetrics leads to imperfect measurements in espresso brewing; scoops to measure coffee beans and shot glasses with volume markings to measure yield cannot be counted on when brewing by recipe. The Flair Brew Scale will provide you with the most accurate measurements—down to 0.1g, and auto-tare and auto-time functions that will keep your brews on point!

3 Modes:

Pre-Infusion Mode starts the clock at first drips and keeps it running all the way through until you lift the cup. Perfect for recipes that call for long holds and blooms.

Auto Mode starts the timer at first drips and stops it as soon as no flow has been sensed for 02 seconds. Perfect for slow ramps straight to pressure with no pre-infusion steps.

Manual Mode let’s you start and pause the timer manually throughout the brew, as well as tare and re-tare as necessary. Perfect for filter and other brewing methods.

Key Features:

• 3 Brewing Modes
• Hidden LCD
• Water Resistant
• Accuracy to 0.1 g, Max capacity 2,000 g
• Long-lasting, Rechargeable Battery (Type-C USB)
• 5 min Auto-Off Battery Saving Mode

The post Flair Brew Scale appeared first on Flair Espresso.

The first handheld tool for creating super-fine micro-foamed milk in seconds. At home, many milk-based drinks get ruined because existing foamers only create runny milk with globs of stiff foam. Not the Nanofoamer. Choose between the super fine or fine nanoscreen and simply froth cafe-style milk from wherever you are. It’s an easy and simple way to create your own latte art that will pair perfectly with your delicious espresso from your Flair Espresso Maker.

Nanofoamers come in two different models: the battery operated V2 and the rechargeable Lithium version.

The post Nanofoamer V2 & Lithium appeared first on Flair Espresso.

The post Flow Tip Milk Jug appeared first on Flair Espresso.

• TAN window is above actual temperature reading
• GREEN window is actual temperature reading
• BLUE window is below actual temperature reading
• Moisture Resistant: Self-Adhesive Backing
• Estimated Shelf Life of Adhesive: 2 yrs, but will vary depending on application and use

The post Temperature Strips appeared first on Flair Espresso.

Now you can brew for two with the Split Spout accessory for your PRO 2! Just add the Flair PRO 2 Split Spout onto the bottom of your Stainless Steel Spout before brewing and pull your shot as you normally would. The Split Spout will automatically divide your shot into two separate streams, for two different cups.

This accessory is best for couples, lovers, friends and family that want to share their espresso together. Just add the Split Spout and share!

*Made of poly material, not metal.

The post Split Spout – PRO 2 appeared first on Flair Espresso.

• PRO 2 Stainless Steel Cylinder
• PRO 2 Stainless Steel Portafilter
• PRO 2 Stainless Steel Dispersion Screen
• PRO 2 Stainless Steel Plunger
• Stainless Steel Spout
• PRO 2 Preheat Cap

Compatible with the original PRO & PRO 2 brewing heads only. If your Flair is PRO-Enabled and you are looking to upgrade, this will not suffice. Please contact our customer service team to ensure compatibility or check out our Buyers Guide for more information on the different brew heads.

The post Second Shot Plus – PRO 2 appeared first on Flair Espresso.

Add it for spouted brewing and then remove for cleaning or brewing naked. This product is a wonderful addition to any second portafilter, but is not needed for great espresso. All PRO 2 units come standard with one spout.

*Compatibility – The removable spout for the PRO 2 is not compatible with any original PRO brewing head!

The post Removable Spout – PRO 2 appeared first on Flair Espresso.