There are two different versions of the shot mirror, depending on the Flair product you own. Check your compatibility below:

• Shot Mirror without Magnetic Coin – Must own a Flair 58 or 58x that features the magnetic disc installed into the base of the Flair post. Mostly Flair 58 bought after mid-May 2023, and Flair 58x bought after late June, 2023.
• Shot Mirror with Adhesive Magnetic Coin – Flair 58, Flair 58 LE and Flair 58 x bought before May 2023. Use with any Flair PRO, Signature, Classic or NEO. For the Flair 58 family, attach your magnetic coin to the post on any side you prefer. For PRO, Signature, Classic and NEO attach to base of your Flair as seen in the phots in this listing.

The post Flair Articulating Shot Mirror appeared first on Flair Espresso.

Volumetrics leads to imperfect measurements in espresso brewing; scoops to measure coffee beans and shot glasses with volume markings to measure yield cannot be counted on when brewing by recipe. The Flair Brew Scale will provide you with the most accurate measurements—down to 0.1g, and auto-tare and auto-time functions that will keep your brews on point!

3 Modes:

Pre-Infusion Mode starts the clock at first drips and keeps it running all the way through until you lift the cup. Perfect for recipes that call for long holds and blooms.

Auto Mode starts the timer at first drips and stops it as soon as no flow has been sensed for 02 seconds. Perfect for slow ramps straight to pressure with no pre-infusion steps.

Manual Mode let’s you start and pause the timer manually throughout the brew, as well as tare and re-tare as necessary. Perfect for filter and other brewing methods.

Key Features:

• 3 Brewing Modes
• Hidden LCD
• Water Resistant
• Accuracy to 0.1 g, Max capacity 2,000 g
• Long-lasting, Rechargeable Battery (Type-C USB)
• 5 min Auto-Off Battery Saving Mode

The post Flair Brew Scale appeared first on Flair Espresso.

The first handheld tool for creating super-fine micro-foamed milk in seconds. At home, many milk-based drinks get ruined because existing foamers only create runny milk with globs of stiff foam. Not the Nanofoamer. Choose between the super fine or fine nanoscreen and simply froth cafe-style milk from wherever you are. It’s an easy and simple way to create your own latte art that will pair perfectly with your delicious espresso from your Flair Espresso Maker.

Nanofoamers come in two different models: the battery operated V2 and the rechargeable Lithium version.

The post Nanofoamer V2 & Lithium appeared first on Flair Espresso.

The post Flow Tip Milk Jug appeared first on Flair Espresso.

*Does not include the stainless steel screen.

REQUIRES Flairs purchased after November, 2017, to be compatible. Please see image to check which portafilter base you have. If you purchased a first generation Signature PRO, this accessory is ONLY compatible with the adaptor ring, sold separately.

The post Bottomless 2-in-1 Portafilter appeared first on Flair Espresso.

The silicone Preheat Cap will fit snugly onto the bottom of your standard brew head (only compatible with NEO Flex, NEO, Classic and Signature models, not compatible with PRO2 or Flair 58). Just add onto the bottom when you’d like to preheat your cylinder, add boiling water, and wait at least 30-45 seconds before dumping.

Then, dump the preheat water through the top of your cylinder and remove the preheat cap by using the custom thumb tab that will keep you far away from any hot water. Brew as desired!

The post Preheat Cap for Standard Brew Head appeared first on Flair Espresso.

The Flow-Control 2 improves upon this technology by adding a removable spout which allows for cleaning and de-clogging of the restricted spout. Now users can clean their portafilters as often as they want, ensuring the highest level of performance on a daily basis.

The Flow-Control 2 continues to allow brewers to add any grounds they want and lower the lever for delicious espresso. As before, this technology works by restricting the exit hole and generating pressure in the puck to ensure proper extraction times.

With proper use, each spout will enjoy a long lifespan. But, in the case of loss or damage customers can purchase a replacement pack of three (3) spouts, available in March of 2021.

The post Flow-Control 2 Portafilter appeared first on Flair Espresso.

• TAN window is above actual temperature reading
• GREEN window is actual temperature reading
• BLUE window is below actual temperature reading
• Moisture Resistant: Self-Adhesive Backing
• Estimated Shelf Life of Adhesive: 2 yrs, but will vary depending on application and use

The post Temperature Strips appeared first on Flair Espresso.

The Pressure Gauge Kit is the perfect upgrade for any Flair NEO Flex or Classic. Flair-istas now have precise control of their brew pressure throughout the entire extraction. The easy-to-read gauge face immediately shows when you’re brewing in the needed range for espresso. From pre-infusion to slow ramps, it’s all in your hands.

Comes with:

• Pressure Gauge
• Angled Stem (compatible with NEO Flex)
• Stainless Steel Plunger
• Pressure Gauge Guard
• Manual

The post Pressure Gauge Kit appeared first on Flair Espresso.

The post Stainless Steel Drip Tray appeared first on Flair Espresso.