Included in your order will be:

• One (1) NEO Flex compatible piston
• One (1) Graduation Disc

*Not compatible with the Flair Classic or Signature

The post Flex Piston and Graduation Disc appeared first on Flair Espresso.

Purchase a NEO Flex Graduation Disc for a permanent, non-release solution to brewing with your NEO Flex. The Graduation Disc is a solid, permanent brewing solution that should only be used once you’ve had the time to dial-in your lever pressure with the Release valve on the red Training Discs.

Each Graduation Disc fits directly into the base of the NEO Flex plunger and is secured with an o-ring.

All NEO Flex purchased after July 24th featured one Graduation Disc. See our tutorials page to learn how to use by clicking here >

The post NEO Flex Graduation Disc appeared first on Flair Espresso.

Buy a replacement pack of NEO Flex Release Valves – now referred to as the Training Disc – for the bottom of your piston. Not compatible with any other Flair product.

Maybe you’ve damaged a Training Disc while learning to dial-in your NEO Flex. Or maybe you’ve just misplaced your backup and want to make sure you’re covered. No matter the reason, we’ve got your solution. Buy this replacement pack of two NEO Flex Training Discs and brew easy!

For information on using the Graduation Disc, head to the NEO Flex Tutorials Page >

The post NEO Flex Training Disc (2 Pack) appeared first on Flair Espresso.

*Does not include the stainless steel screen.

REQUIRES Flairs purchased after November, 2017, to be compatible. Please see image to check which portafilter base you have. If you purchased a first generation Signature PRO, this accessory is ONLY compatible with the adaptor ring, sold separately.

The post Bottomless 2-in-1 Portafilter appeared first on Flair Espresso.

*Only compatible with the NEO Flow-Control 2 Portafilter. Any Flow-Control Portafilter, or NEO, purchased before March of 2021 will not be compatible and must first be upgraded to the Flow-Control 2 Portafilter.

The post Flow-Control 2 Spout Kit appeared first on Flair Espresso.

The silicone Preheat Cap will fit snugly onto the bottom of your standard brew head (only compatible with NEO Flex, NEO, Classic and Signature models, not compatible with PRO2 or Flair 58). Just add onto the bottom when you’d like to preheat your cylinder, add boiling water, and wait at least 30-45 seconds before dumping.

Then, dump the preheat water through the top of your cylinder and remove the preheat cap by using the custom thumb tab that will keep you far away from any hot water. Brew as desired!

The post Preheat Cap for Standard Brew Head appeared first on Flair Espresso.

The Flow-Control 2 improves upon this technology by adding a removable spout which allows for cleaning and de-clogging of the restricted spout. Now users can clean their portafilters as often as they want, ensuring the highest level of performance on a daily basis.

The Flow-Control 2 continues to allow brewers to add any grounds they want and lower the lever for delicious espresso. As before, this technology works by restricting the exit hole and generating pressure in the puck to ensure proper extraction times.

With proper use, each spout will enjoy a long lifespan. But, in the case of loss or damage customers can purchase a replacement pack of three (3) spouts, available in March of 2021.

The post Flow-Control 2 Portafilter appeared first on Flair Espresso.

The post Filling Funnel – Standard appeared first on Flair Espresso.

The post Dosing Cup & Tamper, Standard appeared first on Flair Espresso.

Included in this set are:

• One (1) cylinder o-ring
• Two (2) plunger o-rings (compatible with PGK, NOT compatible with SS Piston)
• One (1) stem o-ring (compatible with PGK)
• Two (2) gauge o-rings (compatible with PGK)

The post Replacement O-rings, Standard Brew Head (6) appeared first on Flair Espresso.